Payment & Shipping Terms:
|Steam Capacity:||1 Ton/h, 1000kg/h, 70hp||Pressure:||0.7/1.0/1.25mpa|
|Steam Temperatur:||170/184/194C||Material:||Q245R Steel Plate|
|Suitable Fuel:||Oil,gas, IPG, City Gas||Boiler Heating Area:||30m2|
|Feed Water Temperature:||30C||Total Power:||3.6kw|
industrial gas boiler,
industrial gas fired steam boilers
WNS series oil and gas steam boiler adopts shell type full wet back type fire tube structure. The structure adopts three return journeys, in which the oil or gas is well atomized by the burner and fully mixed with the air, and is completely burned in the corrugated furnace bile, and then turns from the rear smoke chamber into the return smoke pipe, turns to the front smoke box into the return smoke pipe, enters the back smoke box, and is discharged by the chimney.The size of the furnace liner we choose is large, which provides conditions for the full combustion of fuel, so this packaged steam boiler can burn heavy oil, light oil, natural gas and city gas. In addition, our company adopts threaded smoke pipe in the design, and the relative flow rate can control low smoke resistance, low power consumption and large load regulation ratio under the guarantee of sufficient heat transfer.
Before the shipment, complete boiler system is well skid-mounted on the basement, also we have done the pipe(valves) connection and wire connection. After receiving the boiler, no need installation/ assembly. Just join the boiler to water/ gas/ electricity. Comparing with other traditional boilers in the market, our boiler does save lots of cost/ energy/ time in installation. The additional, the entire boiler system is portable.
1. The overall structure is reasonable and compact, belonging to the packaged steam boiler which meets the delivery conditions of quick installation.This steam boiler is composed of three parts when it leaves the factory;The main steam boiler, chimney and piping system, in which the main engine and chimney parts have been manufactured in the factory, and the piping valves and instruments supporting the main boiler have been installed randomly, and then transported to the site to assemble the main engine and chimney.On the spot connect the air source, power supply and water pipeline to start the test.Greatly shorten the installation cycle, and can guarantee the quality of products.
2. Advanced design performance.The main boiler is of integral structure, the burner is assembled on the cover of the front smoke box, and the main body is arranged with heating surface and combustor.With reasonable structure, compact, low steel consumption, furnace with offset waveform furnace, thermal insulation layer choose new lightweight heat insulation material, outer packing USES color sheet, appearance packaging for cuboid, the boiler performance, weight, structure size and appearance modelling and compared with the capacity of the domestic product has obvious advancement and the look and feel.The boiler feed water equipment is arranged on the boiler base on the right side of the boiler so that it can be integrated with the main engine without having to make another foundation.
3. Our packaged steam boiler is simple water circulation, reasonable structure of pressurized parts, safe operation under the condition of ensuring water quality.
4. Complete auxiliary equipment and advanced comprehensive technical performance.
|Light oil (Kg/h)||Natural gas (Nm³/h)|
|Note: Parameter is for reference only, we can design the boilers based on customers’ needs|
Boiler Executive Standard
1. Design, manufacture, assembly, experiment and acceptance of boilers in strict accordance with national and industrial standards, including but not limited to the following standards: GB/T16508 Boiler Shell Boiler, TSG G0001 Boiler Safety Design Supervision Code, GB50273 Boiler Installation Engineering Construction and Acceptance Code
2. The main steel used in the boiler is 20 GB/T3087, which ensures the safety and reliability of the boiler.
3. Welding materials shall be selected according to NB/T47018. Full penetration welding with argon protection shall be performed on the boiler tube.
Natural gas fired steam boiler is being widely used in hospitals, schools, textile mills, garment factories, large supermarket, garment factories, dyeing factory, hotel, dining room, dining room, swimming pool, food factory, beverage factory, soy products, meat products factory, cannery, brewery, pharmaceutical factory, packing plants, building materials factory, paint factory and other places of the enterprises and institutions
1. What are the available fuel for the oil gas fired boiler?
Oil gas fired boiler could burn both liquid fuel and gaseous fuel. The liquid fuel could be heavy oil, light oil, diesel, furnace oil, bunker oil, LPG (liquefied petroleum gas), etc. The gaseous fuel could be natural gas, city gas, bio-gas, etc.
2. Whether the boiler can burn dual fuel or multi-fuel?
Gentle boiler have oil burner, gas burner, and oil&gas dual fuel burner, we can offer the specific burner based on customers’ requirement.
3. What is the texture of spirally corrugated tube?
The texture of spirally corrugated tube is 20#.
4. The brand of burner?
The brands of burner are Italy Baltur, Rellio, Elco, etc.
5. What is the thickness of combustion chamber?
the thickness of corrugated furnace is different based on working pressure and furnace diameter, generally, the thickness is between 10~18mm, large combustion space, and combustion sufficient.
6. What is the advantages of fire tube boiler?
This fire tube boiler has compact structure and convenient operation, strong load adaptability, lower water quality requirement, and the failure rate of it is lower than 0.1!
7. Details of electric control cabinet.
Electric control cabinet adopts PLC touch screen, display in English. It shows working condition details of boiler, such as water temperature, water pressure, exhaust gas temperature, and over-pressure alarm, etc. In addition, the cabinet is used for set up the parameter, record and analyze the operation data, etc.
8. What is the inlet pressure of gas burner?
The inlet gas pressure is different for different capacity boiler, for example, the pressure for 2 ton steam capacity boiler is about 8~10KPa, while for 4 ton steam capacity boiler is about 18~20KPa.
Contact Person: Ms. Amy zhang
Tel: 0086 1583 8088 573