Payment & Shipping Terms:
|Steam Capacity:||4ton/h, 4000kg/h||Pressure:||0.7/1.0/1.25mpa|
|Steam Temperatur:||170/184/194C||Material:||Q245R Steel Plate|
|Suitable Fuel:||Oil,gas, IPG, City Gas||Boiler Heating Area:||30m2|
|Feed Water Temperature:||30C||Total Power:||3.6kw|
industrial gas fired steam boilers,
gas fired steam boiler
105 % Thermal Efficiency Capacity 1 - 20 Ton Industrial Condensing Gas Steam Boiler
Condensing steam boiler price adopts condense heat recovery technology,which can fully utilize and recycle the energy in the flue gas and provide very low exhaust gas temperature, so as to achieve high efficiency and low pollution emissions,hence it provides good thermal system solutions for enterprises. The boiler is mainly composed of a boiler proper,front and rear gas chamber,condenser, gas water piping system and combustion system etc.This boiler adopts lower corrugated furnace and large "wet-back" combustion chamber, high temperature corrugated furnace for flue gas passing through,flue gas tubes for secondary and tertiary pass, flue gas enters into economizer from rear flue gas chamber and enters into the smokestack,then discharges into the atmosphere.
2.Capacity:1ton to 20ton
3.Design pressure:1.0Mpa(10bar/10kg/145psi), 1.25Mpa(13bar/13kg/180psi), 1.6Mpa(16bar/16kg/232psi),2.5Mpa(25bar/25kg/362psi)
4.Stem temperature:184℃, 194℃,205℃,226℃
5.Design fuel:natural gas/diesel
Except the features of normal three pass fire tube steam boiler, our condensing steam boiler has the following advantages:
1) Boiler construction is three pass fully wet back type.
2) Designed with proper grate area and furnace volume for efficient burning of solid fuels.
3) Proper furnace volume is provided for liquid and gaseous fuels for better combustion efficiency.
4) Higher boiler efficiency as designed properly with required heating surface areas based on fuel type.
not only available for light oil, heavy oil, diesel, kerosene waste oil, but also available gaseous fuels like natural gas, liquefied petroleum gas, city gas
5) Steam Quality up to 98% dry saturated as large disengaging surface and free board distance in boiler shell.
6) Consistent and trouble free performance under Normal Operating Conditions.
|Model||Rated||Rated||Rated||Thermal||Fuel Consumption||Equipment Power||Weight|
|Note: Parameter is for reference only, we can design the boilers based on customers’ needs.|
Real-time monitoring of water level: Electronic water-level detecting device
Water shortage protection: The combustion control system power will be cut off when there is water shortage along with alarm.
Leakage protection: The power will be cut off when there is leakage detected by the control system.
Over pressure protection: When the pressure is over the preset value, the combustion control system power will be cut off along with alarm.
Steam Safety Valve automatically opens to reduce pressure should excessive steam cause pressure build-up.
Steam Pressure Gauge allows visual observation of steam pressure over full range.
Manual Reset Pressure Control provides high limit pressure cut-out with manual reset.
Complete gas manifolds and protection system for gas boiler: Strainer, pressure regulating valve and magnetic valve
Flue gas monitoring device can detect the flue gas temperature automatically.
Disel fired steam boiler is being widely used in hospitals, schools, textile mills, garment factories, large supermarket, garment factories, dyeing factory, hotel, dining room, dining room, swimming pool, food factory, beverage factory, soy products, meat products factory, cannery, brewery, pharmaceutical factory, packing plants, building materials factory, paint factory and other places of the enterprises and institutions
|1. What are the available fuel for the oil gas fired boiler?|
|Oil gas fired boiler could burn both liquid fuel and gaseous fuel. The liquid fuel could be heavy oil, light oil, diesel, furnace oil, bunker oil, LPG (liquefied petroleum gas), etc. The gaseous fuel could be natural gas, city gas, bio-gas, etc.|
|2. Whether the boiler can burn dual fuel or multi-fuel?|
|boiler have oil burner, gas burner, and oil&gas dual fuel burner, we can offer the specific burner based on customers’ requirement.|
|3. What is the thickness of combustion chamber?|
|the thickness of corrugated furnace is different based on working pressure and furnace diameter, generally, the thickness is between 10~18mm, large combustion space, and combustion sufficient.|
|4. What is the inlet pressure of gas burner?|
|The inlet gas pressure is different for different capacity boiler, for example, the pressure for 2 ton steam capacity boiler is about 8~10KPa, while for 4 ton steam capacity boiler is about 18~20KPa.|
|5.The brand of burner?|
|The brands of burner are Italy Baltur, Rellio, Elco, etc.|
Contact Person: Ms. Amy zhang
Tel: 0086 1583 8088 573