Payment & Shipping Terms:
|Item:||Hot Oil Boiler, Thermal Oil Heater||Structure:||Hot Oil Tube|
|Fuel:||Oil,Gas,Diesel,LPG,HFO,Lng||Thermal Power:||120kw, 240kw, 350kw, 500kw,700kw|
|Thermal Effiency:||>75%||Design Pressure:||1.0Mpa|
|Working Pressure:||0.8Mpa||Medium Outlet Temperature:||<350C|
|Heating Area:||9.8-520M2||Warranty:||2 Years|
thermic fluid boiler,
thermo fluid boiler
China Gas Oil Fired Thermal Fluid Heater,Thermal Oil Boiler For Wood Processing Plant
Thermic Fluid Heater, thermal oil boiler, hot oil boiler
thermal capacity: 350kw-1400KW
Working pressure:0.8-1.0 MPA
Outlet temperature:320 C
Available fuel:natural gas, coke oven gas, bio-gas,liquefied petroleum gas, diesel, heavy oil, light oil, crude oil
Available industries:Petroleum, chemical, chemical fiber, pharmaceutical, textile printing and dyeing, building materials, wood processing, vegetable oil processing and other industries
This series thermal oil boiler has compact structure. The heating area is constituted by close-knit coil pipes from inside to outside.Inside coil pipes are the radiation heating surface, and the outer surface of inside coil pipes and outside coil pipes form a convection heating surface.Fuel burn fully in the combustion chamber, the radiation heating surface absorb most heat, and then high temperature flue gas goes into convection heating surface to exchange heat, then go into the air preheater (or waste heat boiler) to heat the required (or water).at last, the low temperature flue gas discharges to the aerosphere through the chimney.
|Model No.||Thermal power(kcal/h)||
|Max. working temp.(℃)||Medium circulation(M3/H)||
1, larger coil combustion chamber can make the combustion in low temperature and reduce the nitrogen oxides emissions with the characters of energy saving and environmental protection.
2, the thermal oil heater structure increases the thermal efficiency. And the high-density ring tube design structure can also reduce the occupation space.
3. The reasonable circulation section structure of multi-pass heat transfer ensure the thermal oil flow load uniform and the operation stable
4, complete control system with warning system, easy operation, safe operation.
5. Spiral coil inside and outside the furnace is composed of many small diameter tube with the advantage of good performance thermal expansion and low pressure.
6, The output (oil) temperature can be accurately controlled. Medium temperature, pressure and smoke temperature protection can also be controlled.
The thermal oil heaters in assembly structure is easy for installation by just connecting system devices. Intelligent control system makes heater operation control easy. Controller with screen display has auto igniting, burning, circulation pumps control, alarm and other control functions.
Thermal oil boiler are insulated with rock wool, whose thickness of which is 100 mm to minimize heat loss and the rock wool is covered with embossed metal sheet, whose thickness of which is 0.8 mm.
Scope of application:
|1||Chemical industry||polymerization industry,oil industry,reaction tank,distillation,enrichment, oil chemical industry, industry, polymerization reaction cans, distillation, concentration|
|2||Plastic industry||plastic foam and squeeze to finalize the design,|
|3||Textile industry||resin stenters,dyeing machine and the dry room,high temperature machine,roller|
|4||Rubber industry||cooking,dry,vegetable oil refining|
|5||Wood industry||heating to finalize the design of chipboard,sandwich plate,wamu board,fiber|
|6||Paper industry||multi-layer cardboard of packed carton box,dying and desiccation|
|7||Others||heating of metal electroplating slot,coating condensation,drying,distillation of pharmaceutical industry,reduction,concentration,dehydration,air conditioning industry,etc|
Contact Person: Ms. Amy zhang
Tel: 0086 1583 8088 573